矿用管道机器人永磁同步电机的可拓优度模型
An Extension Optimization Model of Permanent Magnet Synchronous Motor for Mine Pipe Robot
-
摘要: 针对矿用管道机器人永磁同步电机选型设计存在的问题，本文提出了一种可拓优度模型与算法.首先，针对矿用管道机器人永磁同步电机选型设计过程进行分析，建立了矿用管道机器人永磁同步电机选型设计的评价指标体系；其次，由于评价指标的复杂性，给出了评价指标的权重处理方法以及评价指标的规范化处理方法，使得评价过程具有统一的度量标准；然后，在可拓理论的基础上，给出了矿用管道机器人永磁同步电机选型设计的可拓距与可拓优度计算模型，并给出了具体的算法实现步骤；最后，对某型号矿用管道机器人永磁同步电机设计实例进行分析，并实现电机本体设计.结果表明，本文给出的模型和算法具有良好的操作性和应用效果.Abstract: Due to the problems existing in the selection and design of the permanent magnet motor for the mining pipe robot, an extension model and algorithm have been proposed in this paper. Firstly, aiming at the selection and design process of permanent magnet motor for mine pipe robot, the evaluation index system of permanent magnet motor selection and design for mine pipe robot has been established. Secondly, due to the complexity of evaluation index, the weight processing method of evaluation index and the standardized processing method of evaluation index have been given, so that the evaluation process has a unified measurement standard. Then, based on the extension theory, the extension distance and extension optimization degree calculation model of permanent magnet motor selection design for mine pipe robot have been given and the specific algorithm implementation steps been proposed. Finally, the design example of the permanent magnet motor for mine pipe robot has been analyzed and the design of the motor been realized. The results show that the model and algorithm presented in this paper have a good operation and application effect.
-
-
[1] 杨立萍.使用直驱永磁同步电动机对矿山机械做节能改造的研究[J].价值工程,2016,35(23):187-189. [2] 陈士博,许卫刚.浅析永磁直驱动力系统在矿山皮带运输系统的应用[J].微电机,2016,49(7):91-92. [3] 李红梅,陈涛.永磁同步电机参数辨识研究综述[J].电子测量与仪器学报,2015,29(5):638-647. [4] 王建设,邹海荣.基于有限元法永磁同步电机建模与分析[J].电力学报,2016,31(3):211-216. [5] 张永平,段小丽.TYP2600永磁同步电动机的优化设计与实现[J].电机技术,2017(5):14-16. [6] WANG S N,LI Y H,LI Y Z,et al.Conception and Experimental Investigation of a Hybrid Temperature Control Method Using Phase Change Material for Permanent Magnet Synchronous Motors[J].Experimental Thermal and Fluid Science,2017,81:9-20. [7] 刘凯辉,徐建全.纯电动汽车驱动电机全生命周期评价[J].环境科学学报,2016,36(9):3456-3463. [8] 叶健诚,董晨,马彦华,等.电动汽车充电机性能评价指标体系研究[J].电测与仪表,2015,52(21):91-96. [9] 叶郁.基于可拓学菱形思维模式的3S风景园林设计教学方法研究[J].西南师范大学学报(自然科学版),2015,40(11):193-197. [10] 朱维伟,徐从发,彭祖强.基于行车安全的公路排水设施可拓设计方法及其应用[J].西南师范大学学报(自然科学版),2017,42(3):43-48. [11] 李云伍,刘得雄,吴高华,等.混合动力三轮摩托车制动能量回收系统控制策略[J].西南大学学报(自然科学版),2017,39(3):184-189. [12] 赵燕伟,周建强,洪欢欢,等.可拓设计理论方法综述与展望[J].计算机集成制造系统,2015,21(5):1157-1167. -
计量
- 文章访问数: 1055
- HTML全文浏览数: 724
- PDF下载数: 86
- 施引文献: 0
下载: