| 林琳, 陈洪. 立方尖晶石C3N4硬度的理论研究[J]. 西南大学学报(自然科学版), 2007, 29(5): 9-12. |
| TABOR D. Indenteation Hardness: Fifty Years on a Personal View [J]. Philo Mag A, 1996, 74(5): 1207-1212. doi: 10.1080/01418619608239720 |
| 宋向炯. 物理实验不确定度评定中两变量相关系数的一种近似算法[J]. 西南师范大学学报(自然科学版), 2007, 32(6): 131-134. |
| 王承忠. 测量不确定度直接评定法和综合评定法的几个典型实例[J]. 理化检验(物理分册), 2006, 42(11): 591-594. |
| 王秋亮. Cahn-Hiliard方程的各向异性非协调有限元的误差估计[J]. 西南大学学报(自然科学版), 2012, 34(10): 113-117. |
| CHENG Y T, CHENG C M. Scaling Relationships in Concial Indentation of Elastic-Perfectly Plastic Solids [J]. Intermational Journal of Solids and Structures, 1999, 36(8): 1231-1243. doi: 10.1016/S0020-7683(97)00349-1 |
| SUN Y, BELL T, ZHENG S. Finite Element Analysis the Critical Ratio of Coating Thickness to Indentation Depth for Coating Property Measurement by Nanoindentation [J]. Thin Solid Films, 1995, 258(1/2): 198-204. |
| 魏悦广. 考虑压头尖端曲率的弹塑性材料硬度的解答形式[J]. 力学学报, 2003, 35(4): 509-512. |
| 中华人民共和国国家质量监督检验检疫总局. 金属洛氏硬度计(A, B, C, D, E, F, G, H, K, N, T标尺)检定规程: JJG 112-2013 [S]. 北京: 中国质检出版社, 2014. |
| 何力. 球形硬度压头的曲率半径测量方法及数据处理[J]. 计量技术, 1994(8): 6-7. |
| 韩庆礼, 刘国权, 王永迪, 等. 基于硬度-弹性模量实测关系的镀层硬度数值模拟与优化[J]. 兵器材料科学与工程, 2007, 30(4): 1-4. |
| 孙渊, 王庆明. 压痕硬度测试的有限元分析[J]. 华东理工大学学报(自然科学版), 2007, 33(6): 883-887. |
| GARDNER L, NETHERCOT D. Experiments on Stainless Steel Hollow Sections-Part1: Material and Cross-Sectional Behaciour [J]. Journal of Constructional Steel Research, 2004. 60(9): 1291-1318. doi: 10.1016/j.jcsr.2003.11.006 |
| MACDONALD M, RHODES J, TAYLOR G T. Mechanical Properties of Stainless Steel Lipped Channels [C] //Proceedings of15th International Specialty Conference on Cold-Formed Steel Structures. St. Louis: University of Missouri-Rolla, 2000: 673-686. |
| MIRAMBELL E, REAL E. On the Calculation of Deflections in Structural Stainless Steel Beams: An Experimental and Numerical Investigation [J]. Journal of Constructional Steel Research, 2000, 54(1): 109-133. doi: 10.1016/S0143-974X(99)00051-6 |