| IWASHITA S,MURASE Y,YASUKAWA Y,et al.Developing a Service Robot[C]//IEEE International Conference Mechatronics and Automation. New York:IEEE Computer Society Press,2005:1057-1062. |
| JARA C A,CANDELAS F A,GIL P,et al.An Interactive Tool for Industrial Robots Simulation,Computer Vision and remote operation[J].Robotics and Autonomous Systems,2011, 59:389-401. |
| RAGHAVAN M,ROTH B.Kinematics Analysis of the 6R Manipulator of General Geometry[C]//Robotics Research Fifth International Smposium.New York:IEEE Computer Society Press, 1989:263-269. |
| MANSEUR R,DOTY K L.A Robot Manipulator with 16R Real Inverse Kinematic Solution Sets[J].The International Journal of Robotics Research,1989,8(5):75-79. |
| JIANG J J,FRAANCO P D,ALESSANDRO A.Shared Control for the Kinematic and Dynamic Models of a Mobile Robot[J]. IEEE Transactions on Control Systems Technology,2016, 24(6):2112-2124. |
| ROLLAND L,CHANARD R.Forward Kinematics of the 6-6 General Parallel Manipulator Using Real Coded Genetic Algorithms[C]//IEEE/ASME International Conference on Advanced Intelligent Mechatronics.New York:IEEE Computer Society Press,2009:1637-1642. |
| LEE J, HAN S, LEE J M.Decoupled Dynamic Control for Pitch and Roll Axes of the Unicycle Robot[J].IEEE Transactions on Industrial Electronics,2012,60(9):3814-3822. |
| SKAAR S. B.Robot Modeling and Control-[Book review] [J].IEEE Transactions on Automatic Control,2007,52(2):378-379. |
| CHOⅡ H,R Ryew S M. Anthropomorphic Joint Mechanism with Two Degrees of Freedom[C]//San Francisco. Proc IEEE IntConf Robot Autom. New York:IEEE Computer Society Press, 2000:1525-1530. |