|
陈辉, 赵先琼, 刘义伦, 等.转筒内D型二元颗粒物料滚落模式的径向分离[J].农业机械学报, 2015, 46(6):334-340.
|
|
李政权, 于建群, 张尉林, 等.内充式排种器工作过程和性能的离散元法仿真分析[J].农业工程学报, 2011, 27(11):32-36. doi: 10.3969/j.issn.1002-6819.2011.11.006
|
|
李心平, 熊师, 杜哲, 等.浮动式玉米单穗脱粒装置设计与试验[J].农业机械学报, 2017, 48(7):104-111.
|
|
ZHOU H B, CHEN Y, SADEK M A. Modelling of Soil-Seed Contact Using the Discrete Element Method (DEM)[J]. Biosystems Engineering, 2014, 121:56-66. doi: 10.1016/j.biosystemseng.2014.02.006
|
|
周海波, 梁秋艳, 魏天路, 等.双级振动精密排种器外槽轮式定量供种装置设计与试验[J].农业机械学报, 2016, 47(增刊):57-61, 83.
|
|
BERTRAND F, LECLAIRE L A, LEVECQUE G. DEM-Based Models for the Mixing of Granular Materials[J]. Chemical Engineering Science, 2005, 60(8-9):2517-2531. doi: 10.1016/j.ces.2004.11.048
|
|
张涛, 刘飞, 刘月琴, 等.离散元模拟外槽轮排肥器排量分析[J].农机化研究, 2015(9):198-201. doi: 10.3969/j.issn.1003-188X.2015.09.046
|
|
ROMULI S, KARAJ S, MOLLER J. Discrete Element Method Simulation of the Hulling Process of Jatropha Curcas L. Fruits[J]. Biosystems Engineering, 2017, 155:55-67. doi: 10.1016/j.biosystemseng.2016.11.009
|
|
于建群, 钱立彬, 于文静, 等.开沟器工作阻力的离散元法仿真分析[J].农业机械学报, 2009, 40(6):53-57.
|
|
汪博涛.基于离散单元法的外槽轮排肥器工作过程仿真与参数优化[D].杨凌: 西北农林科技大学, 2017.http://cdmd.cnki.com.cn/Article/CDMD-10712-1017101029.htm
|
|
COETZEE C J, ELS D N J. Calibration of Discrete Element Parameters and the Modeling of Silo Discharge and Bucket Filling[J]. Computers and Electronics in Agriculture, 2009, 65(2):198-212.
|
|
PASHA M, HARE C, GHADIRI M, et al. Effect of Particle Shape on Flow in Discrete Element Method Simulation of a Rotary Batch Seed Coater[J]. Powder Technology, 2016, 296:29-36. doi: 10.1016/j.powtec.2015.10.055
|
|
CHEN Z R, YU J Q, XUE D M, et al. An Approach to and Validation of Maize-Seed-Assembly Modelling Based on the Discrete Element Method[J]. Powder Technology, 2018, 328:167-183. doi: 10.1016/j.powtec.2017.12.007
|
|
赵亚兰, 郭红兵.运用离散元法的物料颗粒体流动特性与储料斗结构优化研究[J].重庆理工大学学报(自然科学版), 2018, 32(9):82-90. doi: 10.3969/j.issn.1674-8425(z).2018.09.013
|
|
邹振宇, 叶进, 杨仕, 等.新型烟苗剪叶机设计研究[J].西南师范大学学报(自然科学版), 2016, 41(4):101-108.
|