| 摘要: |
| 对亚麻纤维进行打浆、抄片，检测物理指标，根据抄片指标，制定出适合生产全亚麻卷烟纸的打浆工艺，根据生产车间工艺设备配置，对盘磨磨齿进行选择、对打浆功率进行调整，对打浆浓度、打浆度、湿质量进行控制，成功开发出预期目标的全亚麻卷烟纸. |
| 关键词: 卷烟纸 亚麻 抄片 打浆 中试 物理指标 |
| DOI：10.13718/j.cnki.xsxb.2019.10.012 |
| 分类号:TS411.1 |
| 基金项目:四川中烟工业有限责任公司宽窄“润甜香”品类重大专项科技项目（川烟工技[2017]185号）. |
|
| Research and Development on Full Linen Cigarette Paper |
|
DING Wei, WEN Wu, KOU Ming-yu, SONG Guang-fu1,2
|
1. Technology Centre, China Tobacco Sichuan Industrial Co., Ltd., Chengdu 610066, China;2.
2. Technology Centre, China Tobacco Chongqing Industrial Co., Ltd., Chongqing 400060, China
|
| Abstract: |
| In this paper, the linen pulp fiber was refined by beating and sheeting, and used to made handsheets for the measurements of various physical properties. Based on the optimized physical index of handsheets, the optimal beating process suitable for full linen cigarette paper was obtained. Depending on the refining apparatus in the plant, various patterns of plates of refiners and the refining power, as well as the pulp consistency, beating degree and the wet weight were optimized. The full linen cigarette paper with a desired target was developed and prepared finally. |
| Key words: cigarette paper linen handsheet beating pilot test physical index |
