引用本文:宋莹.基于Flexsim的服装单件流水线仿真优化[J].西南师范大学学报(自然科学版),2019,44(12):94~99
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 22次   下载 9 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于Flexsim的服装单件流水线仿真优化
宋莹
辽东学院 服装与纺织学院, 辽宁 丹东 118003
摘要:
选取一款女衬衫为实验对象,从服装单件流水线生产的影响因素入手,借助Flexsim软件对该款女衬衫单件流水线进行仿真优化研究.然后通过对该款女衬衫工序分析中的原始数据进行仿真实验,借助拟合软件对测得的实验数据进行函数分析,找出流水线中瓶颈工位工时,在此基础上对该单件流水线工序进行组合兼顾后再次进行模拟仿真的循环测试,最终使该流水线瓶颈工时得以降低,生产平衡率极大提高.
关键词:  Flexsim  单件流水线  工序  仿真优化  生产平衡率
DOI:10.13718/j.cnki.xsxb.2019.12.016
分类号:TS941.717.87
基金项目:辽宁省科技厅项目(51873084).
On Simulation Optimization of One-Piece Flow Garment Assembly Line of Clothing Based on Flexsim
SONG Ying
College of Clothing And Textile, Eastern Liaoning University, Dandong Liaoning 118003, China
Abstract:
In this article, a blouse has been selected as the subject of the experiment, stating from influencing factors of the production of one-piece flow garment assembly line, simulation and optimization of one-piece flow garment assembly line of this blouse with Flexsim software. The bottle-neck in the assembly line has been found. On the basis, it has been reorganized that the procedure run the simulation cycle test again. Finally, the bottle-neck will be reduced, production balance rate been greatly improved.
Key words:  Flexsim  One-piece flow garment assembly line  procedure  simulation optimization  production balance rate
手机扫一扫看