| 唐中华, 张志飞, 陈钊, 等.车内低频振动噪声的虚拟传递路径分析[J].汽车工程, 2020, 42(4): 531-536, 566. |
| HUANG H B, WU J H, HUANG X R, et al. A Novel Interval Analysis Method to Identify and Reduce Pure Electric Vehicle Structure-Borne Noise [J]. Journal of Sound and Vibration, 2020, 475: 1-19. |
| WANG Y L, LU C H, QIN X P, et al. Control of Structure-Borne Noise for a Vehicle Body by Using Power Flow Analysis and Acoustic Path Participation Method [J]. Applied Acoustics, 2020, 157: 1-14. |
| LI Z, SU X P, TAN J F, et al. Multi-Objective Optimization of the Layout of Damping Material for Reducing the Structure-Borne Noise of Thin-Walled Structures [J]. Thin-Walled Structures, 2019, 140: 331-341. doi: 10.1016/j.tws.2019.03.046 |
| 张立军, 汪子燚, 孟德建.汽车车身空腔阻隔结构降噪试验研究[J].振动与冲击, 2020, 39(1): 232-239. |
| 苏仕见, 徐元利, 弓剑, 等.车身壁板自由阻尼层稳健性优化设计[J].汽车工程, 2020, 42(4): 537-544. |
| 王若平, 张旭, 夏仕朝, 等.某MPV车内轰鸣噪声试验分析与降噪改进[J].重庆理工大学学报(自然科学), 2018, 32(1): 28-34. |
| 崔华阁, 闫晓晓, 江克峰.基于电机转矩波动控制的车内噪声优化研究[J].重庆理工大学学报(自然科学), 2018, 32(10): 58-63. |
| 申秀敏, 龙伟, 李利明, 等.某MPV车怠速车内噪声控制与声品质提升[J].重庆理工大学学报(自然科学), 2019, 33(10): 27-32. |
| 高书娜, 邓兆祥.轿车车内低频噪声的判定参数探讨[J].汽车工程, 2013, 35(8): 744-748. doi: 10.3969/j.issn.1000-680X.2013.08.016 |
| 高书娜, 邓兆祥.车身低噪声设计新方法[J].机械工程学报, 2012, 48(12): 96-102. |
| GEORGIEV V B, KRYLOV V V, WINWARD R E T B. Simplified Modelling of Vehicle Interior Noise: Comparison of Analytical, Numerical and Experimental Approaches [J]. Journal of Low Frequency Noise, Vibration and Active Control, 2006, 25(2): 69-92. doi: 10.1260/026309206778494300 |
| 靳国永, 杨铁军, 刘志刚, 等.弹性板结构封闭声场的结构-声耦合特性分析[J].声学学报(中文版), 2007, 32(2): 178-188. |
| 邓兆祥, 高书娜.结构声腔耦合系统的振型耦合特性分析及应用[J].吉林大学学报(工学版), 2012, 42(5): 1120-1126. |
| 高书娜.封闭腔内声场的核心变量及其应用研究[J].汽车工程, 2019, 41(1): 69-74. |
| DONG H L, DENG Z X, GAO S N. Application of the Mode Shape Coupling Mechanism of Structural-Acoustic Coupled System on Vehicle Interior Noise Control [J]. Chinese Journal of Automotive Engineering, 2011, 1(4): 248-253. |